A unique, integrated base is hassle-free for some rifle platforms. For excellent, reliable performance and loads of user-friendly features, look no further than the SPARC. Rubber Cover with Flip-Up Lens Caps. Daylight Bright Red Dot Reticle. The daylight bright 2 MOA dot is fast and easy to use.
Choose among ten variable illumination settings-the lowest two settings are night-vision compatible. The key thing to remember when shooting with the SPARC Red Dot is to keep both of your eyes open!
Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. The SPARC red dot incorporates elevation and windage dials with audible clicks. 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc. Remove the turret cap and turn the inner screw counter-clockwise to adjust the bullet's point-of-impact up; turn the inner screw clockwise to adjust bullet's point-of-impact down.Remove the turret cap and turn the inner screw counter-clockwise to adjust the bullet's point-of-impact to the right; turn the inner screw clockwise to adjust windage bullet's point-of-impact to the left. Mounting the SPARC Red Dot. The SPARC Red Dot can be mounted at two heights, lower 1/3 co-witness and absolute co-witness.
To mount it at lower 1/3, mount the sight as received. The optic center will be 40mm above the base surface. To mount for absolute co-witness you can remove the 3mm base shim. The optic center at absolute co-witness will be 37mm above the base surface.
To change the mount height, loosen and remove the four base screws and remove the base clamp along with the 3mm shim. Reinstall the base clamp with the four shorter screws supplied with your Red Dot. Vortex Sparc Red Dot Specifications.
This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Red Dot & Laser". The seller is "nolimitfishing" and is located in this country: US. This item can be shipped to United States.