Moa Red Dot

Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA

Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA

Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA
This model does NOT fit the new Canik TP9 Elite SC and Springfield Hellcat that has Shield rms/rmsc cut, ADE is releasing a new model called SPIKE in June 2020 will fit. The 2019 Delta Red dot sight-6 MOA promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. The aluminum housing ensures this unit will stand up to whatever you throw at it. Top load system, no need to remove the sight to change the battery.

Can also be used with a long range rifle scope for that perfect backup system. The lowest setting is invisible by human eye that is for using with a night vision. The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45.

Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.

1.75" length x1.25" width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate.

Additional mounting plates for hunguns sells separately. Ade Advanced Optics first made its appearance in the firearms accessory industry by doing private label production for several Major manufacturers and retailers. During this period, Ade Advanced Optics began receiving requests from numerous customers for access to the affordable, high quality products that Ade Advanced Optics was capable of producing. By soliciting feedback from both clients and end users, Ade Advanced Optics was able to overcome the challenges a new company often faces when entering a global market and industry, especially one as competitive as the shooting, hunting, and outdoors industry. Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot.

Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands. Ade Advanced Optics model RD3-011 is designed to fit slide/footprint/ pattern of mounting plate made for of Trijicon RMR only.

Therefore any mounting plate made for Trijicon RMR will fits RD3-011. This ADE RD3-012(this are several models of Delta RD3-012, such as green dot and red dot, and different MOA), alone with RD3-006, RD3-009, RD3-013 do NOT fit Springfield HELLCAT OSP, because springfield Hellcat OSP red dot footprint is based on Shield RMS. ADE sights has the footprint of Doctor/Vortex Venom type footprint.

This RD3-012, and RD3-006, RD3-009 and RD3-013 fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot. All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. When you first receive the red dot. It has a picatinny mounting plate pre-assembled.

Please use allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. There are many popular handguns on the market, due to the size difference of the handguns, each mounting plate is slightly different in dimensions. There are also many manufacturers making a variety of handgun plates that replace the rear sight, including ADE, Lakeline LLC, EGW, and Outerimpact.

The screw comes with our red dot come with a pair of M3x6mm screws to connect to the pre-assembled picatinny mounting base. Some mounting plates made by other companies for specific handgun might need a longer screw such as M3x8mm or shorter screw such as M3x4mm depends on the thickness of the mounting plate/adapter.

If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. We always reply emails within 8 hours.

All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item. The item "Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA" is in sale since Wednesday, July 31, 2019. This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Red Dot & Laser Scopes". The seller is "opticsfactory" and is located in Oregon City, Oregon. This item can be shipped to United States.
  • Model: RD3-012-Canik
  • Reticle Color: Red
  • Type: Dot
  • MPN: RD3-012-CANIK
  • Brand: ade advanced optics

Ade RD3-012 Red Dot Sight For CANIK TP9SF Elite / TP9 SFX Handgun pistol-6 MOA